Changing the Language Display 21
User Guide v 1.4 — September 2015 Neo2 Operator Interface
4.5 Changing the Language Display
Neo2 allows the operator to select the language displayed on screen.
To change the language:
1. On the Home screen, touch Language. The Language screen appears and displays
available options.
2. Touch the language to display.
3. Touch OK. The screen is now updated to the language selected.
4.6 Supply Voltage Screen
The Supply Voltage screen displays a graphical view of the phase pairs based on the Supply
Configuration parameter selected in the System Setup screen:
• Delta 3PH
• Wye 3PH+N
• Single Phase
• Integrated TX
Figure 4-4 Language Screen
To Next Page
Loading...
