Husky Altanium Neo2 - Setting the Maximum Temperature Limit; Setting the Earth Leakage

v 1.4 — September 2015 Altanium Neo2
66 Setting the Maximum Temperature Limit
To access the Advanced System Setup screen:
1. Touch SYSTEM. The numeric key window appears.
2. Enter the Advanced System Setup screen code and then touch Enter.
9.2.1 Setting the Maximum Temperature Limit
The MAX TEMP LIMIT button sets the over maximum temperature limit for the system. This
value is interpreted as the number of degrees over the setpoint the maximum temperature
alarm is activated.
To set the maximum temperature limit:
1. On the Advanced System Setup screen, touch MAX TEMP LIMIT. The numerical key
window appears.
2. Enter the value for the number of degrees over the setpoint for maximum temperature.
The default setting is 111 °C (200 °F).
3. Touch Enter.
9.2.2 Setting the Earth Leakage
The EARTH LEAKAGE button enables or disables the earth leakage testing on the system.
This setting overrides the individual zone settings.
To set the earth leakage testing on the system:
1. On the Advanced System Setup screen, the EARTH LEAKAGE button displays the
setting.
2. Touch EARTH LEAKAGE to toggle the setting between YES and NO. The default setting
is YES.
Figure 9-5 Numerical Key Window
1. Enter Button