Setting Security Levels for Specific Functions 27
User Guide v 1.4 — September 2015 Security
3. In the numerical key window, enter the new password and then touch Enter.
Passwords are limited to 10 digits. The new password will now be displayed.
5.3 Setting Security Levels for Specific Functions
The Neo2 security system provides different levels of security to restrict the access of users
and maintains the controls and settings for the system.
To change a Security Level for a function the level 2 password must be entered first. Look at
the Current Level in the Security screen and level 2 should be displayed.
To change the Security Level for a specific function:
1. On the Security screen, touch the Function number.
2. Touch the 0, 1, or 2 buttons to set the desired level.
3. Touch OK.
For a description of the items on the security screen refer to Section 5.3.1.
5.3.1 Security Item Descriptions
Following is a brief description of the different features that require a Security Level.
Figure 5-3 Numerical Key Window
1. Enter Button
Feature Description
Zone Setpoint Enables the operator to adjust the zone setpoints.
Zone Abort Window Enables the operator to adjust the value for the ABORT shutdown
condition.
To Next Page
Loading...
