v 1.4 — September 2015 Altanium Neo2
16 Overview
The STOP, START, STANDBY and BOOST function buttons are located in the upper left hand
portion of the LCD display.
Figure 4-1 Home Screen
Button Description
STOP button - Turns power OFF to all zones, regardless of system
condition.The button will appear darker when in the STOP mode.
START button - Turns power ON to the zones that have a set point
displayed.The button will appear darker when in the START mode.
STANDBY button - Places the system in STANDBY mode.The button will
appear darker when in the STANDBY mode (along with the START
button).
BOOST button - Places the system in BOOST mode.The button will
appear darker when in the BOOST mode (along with the START button).
Next Page button - Used to view the next page of data. This button is not
applicable to all screens.
To Next Page
Loading...
