Hypertherm XPR300 User Manual

Installation
3
XPR300 Instruction Manual 809480 101
2. Connect the coolant hose set to the
gas connect console:
a. Connect the coolant return hose
(red) to the coolant return
fitting (red, bottom) .
b. Connect the coolant supply hose
(green) to the coolant supply
fitting (green, top) .
Red
1
2
Green
3
4
1
2
3
4

Hypertherm XPR300 Specifications

General

Cutting Current	300 A
Duty Cycle	100% at 300 A
Technology	X-Definition Plasma
Gas Supply	Oxygen, Nitrogen, Air
Cutting Capacity (Mild Steel)	38 mm (1.5 in)
Severance Capacity (Mild Steel)	75 mm (3 in)
Pierce Capacity (Mild Steel)	50 mm (2 in)
Input Voltage	200–480 V, 3-PH, 50/60 Hz