Hypertherm XPR300 User Manual

Connect for Communication
4
XPR300 Instruction Manual 809480 185
Plasma power supply
On this screen you can monitor the status of the plasma power supply. This screen also lists inputs
and outputs. When highlighted red or gray, that input or output is active.

The XPR web interface shows different fields for different XPR models.
T
he screen shown is for reference only.

Hypertherm XPR300 Specifications

General

Cutting Current	300 A
Duty Cycle	100% at 300 A
Technology	X-Definition Plasma
Gas Supply	Oxygen, Nitrogen, Air
Cutting Capacity (Mild Steel)	38 mm (1.5 in)
Severance Capacity (Mild Steel)	75 mm (3 in)
Pierce Capacity (Mild Steel)	50 mm (2 in)
Input Voltage	200–480 V, 3-PH, 50/60 Hz