Hypertherm XPR300 User Manual

XPR300 Instruction Manual 809480 39
Qualifications and Requirements
Document requirements
This manual refers to several other documents. These documents include:
 XPR Cut Charts Instruction Manual (809830)
 CNC Communication Protocol for the XPR Cutting System (809810)
 XPR Preventative Maintenance Program (PMP) Instruction Manual (809490)
 XPR Firmware Updates Field Service Bulletin (809820)
You can find these documents on the USB memory stick that came with your plasma power supply.
If you do not have these documents, technical documentation is available at
www.hypertherm.com/docs.

Technical documentation is current as of the date of its release.
Subsequent revisions are possible. Refer to www.hypertherm.com/docs
for the most recent revisions of released documents.

Hypertherm XPR300 Specifications

General

Cutting Current	300 A
Duty Cycle	100% at 300 A
Technology	X-Definition Plasma
Gas Supply	Oxygen, Nitrogen, Air
Cutting Capacity (Mild Steel)	38 mm (1.5 in)
Severance Capacity (Mild Steel)	75 mm (3 in)
Pierce Capacity (Mild Steel)	50 mm (2 in)
Input Voltage	200–480 V, 3-PH, 50/60 Hz