Hypertherm XPR300 User Manual

Specifications
1
XPR300 Instruction Manual 809480 29
Plasma power supply (part number varies)

The part number and specifications can differ for your plasma power
supply. Refer to Table 1 on page 30 and Table 2 on page 31 for part
numbers and specifications.
81.70 cm
(32.17 in.)
127.28 cm
(50.11 in.)
124.76 cm
(49.12 in.)
590 kg
(1,300 lb)

Hypertherm XPR300 Specifications

General

Cutting Current	300 A
Duty Cycle	100% at 300 A
Technology	X-Definition Plasma
Gas Supply	Oxygen, Nitrogen, Air
Cutting Capacity (Mild Steel)	38 mm (1.5 in)
Severance Capacity (Mild Steel)	75 mm (3 in)
Pierce Capacity (Mild Steel)	50 mm (2 in)
Input Voltage	200–480 V, 3-PH, 50/60 Hz