5.3 Setting maintenance information
5-6
5. Preventive/Predictive Maintenance
Basic operation
To set the target value,
touch the field of the relevant item.
The set value will blink and Ten Key window
will open.
Enter the value with the Ten Key pad and
touch the [ENT] key.
The target value will change.
If you touch [ESC], the target value will not
be changed and the original window will
return.
Touch the [Information edit] button.
A confirmation message for rebooting the
controller will be displayed.
The setting change will take effect after
rebooting.
If the actuator has been replaced,
touch the [Actuator replacement] button.
"Total travel count" and "Total travel distance"
will be cleared to "0".
1
Action
2
Action
Action
4
Action
3
To Next Page
Loading...
Need help?
General