8.3 Visual inspection items
8-4
8. Maintenance and Inspection
8.3 Visual inspection items
Refer to "8.5 Greasing method" for detailed information about the greasing method.
Refer to "8.6 How to replace components" for detailed information about specific component
replacement and adjustment methods.
External visual inspection
Inspection items Maintenance work
Is abnormal noise or vibration
generated?
Refer to "7.3 Troubleshooting with no alarm
generated" for help.
Are ELECYLINDER mounting bolts
loose?
Tighten them further.
Is the cable scratched? Replace if the damage is severe.
Is the connector loose? Re-insert correctly.
Is grease dripping out?
(especially if vertically mounted)
Clean up any drips.
Replenish the grease.
To Next Page
Loading...