6.2 How to change parameters
6-4
6. Parameters
Touch the [Yes] button.
The controller will restart, enabling parameter
changes.
However, if you touch [No], the reboot will be
canceled and the Edit parameters window will
return.
Touching the explanation button
displays a description of each parameter
at the bottom of the screen.
Caution
Simply changing the parameters alone is not sufficient to enable the changes.
After making changes, the power must be turned off and on or a software reset
performed.
After the ELECYLINDER restarts, the parameter changes will be enabled.
Do not attempt to turn OFF the power while writing the parameters.
This may damage the controller.
5
Action
Reference
To Next Page
Loading...
Need help?
General