12.1 Index
12-3
12. Appendix
Payload
EC-S13 ······································ 1-7 to 9
EC-S13X ································ 1-12 to 14
EC-S15 ·································· 1-17 to 18
EC-S15X ································ 1-21 to 22
Peek max. power capacity ················ 3-2, 3-7
PNP specification (model: PN)
·································· 1-27, 3-17 to 18
Positioning operation ··················· 4-15 to 17
Positioning repeatability
·························· 1-10, 1-15, 1-19, 1-23
Power capacity ······························· 3-2, 3-7
Power I/O cable ··················· 1-30, 3-32 to 37
Power I/O connector ············· 1-31, 3-27 to 32
Power supply for solenoid brake release
···················· 3-2, 3-17 to 18, 3-32, 3-37
Power supply voltage ········ 3-2, 7-7 to 8, 7-18
Precautions for Axis Operation with Wireless
Connection ···································· Intro-15
Precautions for handling ············· Intro-9 to 10
Precautions for Handling Wireless Operation
····································· Intro-12 to 14
Precautions for transportation ·················· 2-1
Precautions regarding parameters············ 6-1
Preventive/predictive maintenance ··········· 5-1
Product list ·········································· 1-6
Q
R
Rated thrust
EC-S13 ············································ 1-7
EC-S13X ········································ 1-12
EC-S15 ·········································· 1-17
EC-S15X ········································ 1-21
RCON-EC connection specification
(model: ACR) ····································· 1-27
Regenerative resistor unit ············· 1-29, 3-25
Replacement of intermediate support cushion
········································· 8-33 to 41
S
Safety Guide ·································· Intro-1
Selection of circuit breaker ······················ 3-8
Selection of leak current breaker ·············· 3-8
Setting maintenance information ········ 5-5 to 6
Setting/adjustment of operating conditions
(AVD) ··········································· 4-7 to 9
Smooth accel/decel setting
(Parameter No. 5) ················· 6-5, 6-10, 7-12
S-motion ··········································· 6-10
Speed
EC-S13 ··········································· 1-7
EC-S13X ······································· 1-12
EC-S15 ········································· 1-17
EC-S15X ······································· 1-21
ST0 signal (backward)
···· 3-17 to 18, 3-29, 4-10 to 11, 4-14 to 17
ST1 signal (forward)
···· 3-17 to 18, 3-29, 4-10 to 11, 4-14 to 17
Stop position setting/adjustment ·············· 4-6
Storage/preservation environment ··········· 2-3
System configuration ····························· 3-1
T
Teaching tool connections ······················ 4-3
Total travel count ·························· 5-2, 7-20
Total travel distance ······················ 5-2, 7-20
Troubleshooting by alarm groups ··········· 7-13
Troubleshooting confirmations ··········· 7-1 to 5
Troubleshooting diagnosis ················ 7-6 to 7
Troubleshooting with no alarm generated
··········································· 7-8 to 12
Two-circuit power supply specification
(model: TMD2) ··························· 1-28, 3-20
U
V
W
Warning: Maintenance warning 1 ····· 5-2, 7-20
Warning: Maintenance warning 2 ····· 5-2, 7-20
Warning: Maintenance warning 3 ····· 5-3, 7-21
Warning: Maintenance warning 4 ····· 5-4, 7-22
Warranty ······································ 11-1 to 2
Wireless axis operation specification
(model: WL2) ····································· 1-28
Wireless communication circuit board
replacement ······································ 8-23
To Next Page
Loading...