Error codes, descriptions, and corrective actions 67
5962 CD-ROM Configuration Error 1.Check that all CD-ROM drive cables are correctly and securely connected.
2.If you added, removed, or moved any drives in your system unit, press Enter
while the error message is displayed to enter the Setup Utility. Choose the
System Information from the Setup Utility Main Menu to verify that only the
options for the drives you changed have next to them. Return to the main
menu, press the Esc key and then press Enter to save the new configuration.
If options changed that were not supposed to, check your A Guide to
HelpWare and All the Extras folder for information on obtaining service.
86XX Pointing Device Error 1.Make sure the keyboard and mouse cables are correctly and securely
connected to the ports on the back of the system unit.
The keyboard port has this symbol next to it to help you:
The mouse port has this symbol next to it to help you:
2.Make sure that a keyboard key or a mouse button is not being held down.
Table 10: Error codes, descriptions, and corrective actions (Continued)
Error Code Description Here’s what to do:
Notes:
1.An X shown as part of the error code in this table represents any number between 0 and 9.
2.If any of these errors continue after taking the actions listed, check your A Guide to HelpWare and All the Extras folder for
information on obtaining service.
bi2gntce.bk : bi2gsolv.doc Page 67 Saturday, June 3, 1995 6:54 AM
To Next Page
Loading...
Need help?
General
