EN
2 - TECHNICAL INFORMATION BOSS 332/545/552 HD
2 - Pag. 28 / 32
2.8 DEVICE FOR SLIDING HEADSTOCK LATHES - FOREWORD
This bar feeder has been designed and manufactured to be coupled to sliding headstock lathes
too. To do this, special devices are available which are listed and then described below.
2.8.1 Bar/headstock synchronizing device - Description
It is used to connect the bar-pusher (and
consequently, the bar) to the lathe headstock, to
obtain their synchronized forwards/backwards
movement.
To Next Page
Loading...
