IEMCA BOSS 545 E - 6 USE AND OPERATION BOSS 332;545;552 HD

EN
6 - USE AND OPERATION BOSS 332/545/552 HD
6 - Pag. 2 / 24
6.1 CONTROL DESCRIPTION
INFORMATION:
It is possible to start the bar feeder in automatic mode from the handheld
keyboard, even when lathe 'MAN/AUT' signal is in Manual mode.
INFORMATION:
When the bar feeder is in Automatic mode, bar feeding is possible only when the
Lathe 'MAN/AUT' signal is in Automatic mode.
INFORMATION:
By pressing the Manual mode button on the handheld keyboard it is possible to
prevent the bar feeder Automatic start by the lathe.