IEMCA BOSS 545 E - 5 - ADJUSTMENTS AND SETTING-UP; 5.2 GENERAL ADJUSTMENTS - FOREWORD; 5.3 SETUP ACCORDING TO THE BAR TO BE MACHINED; 5.4 CAM BOX - TIMING

5 - ADJUSTMENTS AND SETTING-UP BOSS 332/545/552 HD
EN
5 - Pag. 1 / 34
INDEX
5.1 ADJUSTMENT AND SETUP - FOREWORD ............................................................2
5.2 GENERAL ADJUSTMENTS - FOREWORD ..............................................................3
5.2.1 Feeding chain - Adjustment......................................................................................3
5.2.2 Air adjusting unit - Adjustment .................................................................................3
5.3 SETUP ACCORDING TO THE BAR TO BE MACHINED..................................................4
5.3.1 Guide channels, half bushes, bar pusher and collet - Replacement............................11
5.3.2 BAR PUSHER REPLACEMENT PROCEDURE...............................................................24
5.3.3 Clamps - Replacement............................................................................................26
5.3.4 Bar guide plates and bar selectors - Adjustment.......................................................28
5.4 CAM BOX - TIMING................................................................................................31