4 - HANDLING AND INSTALLATION BOSS 332/545/552 HD
EN
4 - Pag. 3 / 32
4.1 PACKAGING
There are three possible bar feeder packaging:
A WITHOUT PACKAGING.
B WITH PALLET: the bar feeder is placed on a pallet and wrapped with protective film.
C WITH CRATE: the bar feeder is contained in a crate and wrapped with protective film.
4.2 LIFTING
DANGER - WARNING:
handling and lifting operations should be carried out with suitable equipment
(see weight table in section 2.6.) and by specially trained and experienced
personnel.
According to the packaging choice, lifting is carried out as shown in the next page.
To Next Page
Loading...
