INFICON Software Operation | 9
074-594-P1H Micro GC Fusion Operating Manual 219 / 319
8
A message will prompt the user to reload the method and apply the calibration.
9
To reprocess the calibrated run with the new information, click the icon. A
confirmation message will display
Are you sure you want to reprocess the X
selected run(s)?
Click the icon to reprocess the run. To apply the new
calibration to prior runs, select the desired runs from the list before clicking the
icon.
10
A confirmation message will display.
11
Click the icon to exit the calibration window.
12
Click the updated method preset to reload the method.
To Next Page
Loading...
