Ingenico Move 5000 - Opening the Back Cover; Sams & Sims

Page 11
Move/
5000
User Guide
Copyright© 2019 Ingenico
Opening the back cover
Switch off the terminal before opening the back cover
Turn the terminal over and
unclip the back cover by
pushing on the clip in the
direction of the arrows in the
picture
SAMs & SIMs
• The connector modules security SAM / SIM are located inside the terminal
in a closed compartment
• SAMs / SIMs are identified by the engraved marks on the lower housing
• When introducing a SAM / SIM in its slot, be sure to put the cut corner as
indicated on the engraved markings.
SIM 2 connector or SAM 3 connector
SIM 1 connector
SAM 1 connector
SAM 2 connector