Ingenico Move 5000 - Overview of Move;5000

Page 7
Move/
5000
User Guide
Copyright© 2019 Ingenico
Overview of Move/5000
The Move 5000 is a ‘Multi Comms’ capable device. This means that it is possible
to enable multiple modes of communication during the self-install process or at a
time more suitable after the self-install process. Only one comms method is
required to install the terminal. Although, it is advisable to set up as many methods
as possible at the self-install stage.
Please refer to the section ‘Terminal Installation’ for the relevant screens.
Mobile: 2G or 3G GPRS
Bluetooth: Ethernet via a Bluetooth Base
WiFi: Wireless local area networking
Weight
(
w
\
o
paper roll or battery)
320g
Dimensions (L x w x h) 169x78x57 mm
Electrical mains network 100-240VAC / 50-60 Hz - Class II equipment
Terminal Connections Micro USB AB serial link Power connector Contacts for Cradle
3.2” LCD Touch screen
Contactless card reader
Magnetic card reader
Easy loading printer
Backlit keyboard
Chip card reader