Ingenico Move 5000 - Ethernet Network Configuration; IP Configuration Menu

Page 90
Move/
5000
User Guide
Copyright© 2019 Ingenico
Ethernet
Selecting ‘Ethernet’ from the ‘Manage Interfaces’ menu will display the ‘IP
Configuration Menu’:
IP Configuration Menu
Note: The following options are only applicable if the terminal is in ‘Static Mode’,
they will have no effect on the terminal if it is configured in ‘DHCP Mode’.
You should only change this data on instruction from the helpdesk.
Touch the screen
to select an
option or drag
the scroll bar to
view other
options.
Touch the screen
to highlight the
required option.
Save Settings
Touch ‘Save
settings’ on the
screen to save
the changes.
The settings will
be saved.