Ingenico Move 5000 - IP Mode Configuration (DHCP;Static); IP Address Configuration

Page 91
Move/
5000
User Guide
Copyright© 2019 Ingenico
Mode
You may configure the terminal to use DHCP or Static IP addresses. The initial
screen will display which mode you are in
The terminal will
display the
current mode.
Touch the screen
to open the
window
Press to
change to DHCP
Mode.
Press return
to previous
screen.
Press to
change to Static
Mode.
Press return
to previous
screen.
Press to exit
function.
IP
You may configure the IP address. The initial screen will display which IP address
you are connected to.
Press to clear all digits.
Press to clear one digit at a time.
Press to confirm data.
The terminal will
display the
current mode.
Touch the screen
to open the
window
Press to
confirm address
or clear the digits
and re-enter new
address.