Ingenico Move 5000 - IP Subnet Mask Configuration; Gateway Address Configuration; DNS Server 1 Configuration

Page 92
Move/
5000
User Guide
Copyright© 2019 Ingenico
Mask
You may configure the Mask address. The initial screen will display which Mask
address you are connected to.
Touch screen to
select ‘Mask’ or
press to select
highlighted
option.
Press to
confirm address
or clear the digits
and re-enter new
address.
Gateway
You may configure the Gateway address. The initial screen will display which
Gateway address you are connected to.
Touch screen to
select ‘Gateway’
or press to
select highlighted
option.
Press to
confirm address
or clear the digits
and re-enter new
address.
DNS1
You may configure the DNS1 address. The initial screen will display which DNS1
address you are connected to.
Touch screen to
select ‘DNS1’ or
press to select
highlighted
option.
Press to
confirm address
or clear the digits
and re-enter new
address.