Ingenico Move 5000 - Mobile (GPRS) Setup; Set Mobile Network Mode

Page 87
Move/
5000
User Guide
Copyright© 2019 Ingenico
Mobile (GPRS Setup)
Set Mode
Press to
‘Setup’ your
‘Mobile
Interface’.
List of available
networks shown.
Touch preferred
network on the
screen to select
it.
Touch ‘Set Mode’
on the screen to
select it or press
to select
highlighted
option.
The terminal will
attempt to
register with the
selected
network.
The terminal will
display current
mode.
Press to
accept or to
change mode.
Confirmation of
registration with
the selected
network.
Press to
acknowledge.
Terminal will
scan for
networks if
was pressed.
Terminal returns
to ‘Setup Menu’.
Press to exit
the function or
choose another
option.
The terminal will now remain in ‘Manual Mode’ until you re-select ‘Automatic Mode’
by repeating steps 1 – 3.