Adding or Replacing Hard Disks
Intel
®
Entry Storage System SS4000-E User Guide 129
4. Take the desired action:
To do this Do this
Add the disk to a linear configuration or
use it as a spare for a normal three-disk
RAID 5 configuration
Click Add.
The Disks page indicates the current state of the disk
configuration.
Add the disk to the storage system but not
add it to the RAID at this time
Click Ignore.
The Disks page lists the disk is part of the storage
system, but its status is New, indicating it is not being
used.
If you subsequently reconfigure the disks as
described in “Reconfiguring Your Storage System
Disks” on page 71, you are able to use this new disk.
Return to the previous page, for example,
to re-scan the storage system
Click Back.
To Next Page
Loading...
Need help?
General