Technical Specifications
Intel
®
Entry Storage System SS4000-E User Guide 167
9 Technical Specifications
See the Intel
®
Entry Storage System SS4000-E Technical Product Specification at http://
support.intel.com/support/motherboards/server/ss4000-E/ for additional technical
specification information.
Hardware Specification
Table 5. Hardware Specifications
Note: If the temperature of the processor reaches or exceeds 85º C (185º F) or if the temperature
of any of the backplane temperature sensors reaches or exceeds 55º C (131º F), the
storage system shuts down automatically.
If the temperature of any of the backplane temperature sensors reaches or exceeds 42º C
(107.6º F), the fan runs at full speed. If, subsequently, the temperature of any of the
backplane temperature sensors reaches or falls below 37º C (98.6º F), the fan returns to
normal speed.
Component Specification
Processor 400-MHz Intel
®
IOP80219
Memory 256 MB 32-bit DDR SDRAM
Flash 32-MB NOR Flash
Hard Drive Supports up to four 3.5-in SATA-I hard drives from 80 GB
NOTE: The total amount of storage space cannot exceed 3 terabytes.
Maximum Capacity Up to 3 terabytes
Network Two Intel
®
gigabit LAN port interface
USB Two USB 2.0 connectors
EMI Safety CE/FCC Class B
System Power 200-W power supply
Operating Temperature 10º C to 35º C (50º F to 95º F)
To Next Page
Loading...
Need help?
General