Getting Started
Intel
®
Entry Storage System SS4000-E User Guide 21
Configuring Your Storage System
Once your storage system is initialized as described in “Initializing your Storage System”
on page 16, follow these steps to run the System Setup wizard and perform the initial
configuration:
1. If you have not installed the Storage System Console, install it as described in
“Logging in to the Manager” on page 27 and start it as described in “Starting the
Console” on page 18.
In the left pane, click the name of the storage system. If you use both Ethernet ports,
the name of the storage system displays twice in the left pane. You can click either
one. Then click Log On Storage System Manager.
The welcome page displays:
2. On the welcome page, click Next. The End User Software License Agreement page
displays:
3. If you agree to the terms, select the I accept the license agreement check box and
then click Next. The Host Name page displays:
To Next Page
Loading...
Need help?
General