Adding or Replacing Hard Disks
130 Intel
®
Entry Storage System SS4000-E User Guide
Adding Hard Disks to a Degraded RAID Configuration
To add a hard disk to a degraded RAID configuration:
1. Insert the hard disk into the storage system.
You can do this whether the storage system is powered on or off.
2. Access the Manager or refresh the browser window.
The Disk Change Notification page appears:
3. Click Continue to continue rebuilding the disk and return to the Manager. The Disks
page shows the progress of the rebuilding progress.
If the information on this page is not correct, click Scan to scan the storage system
again and update the page.
You can also click Shut Down to shut down the storage system. When you restart the
storage system, this page re-appears.
To Next Page
Loading...
Need help?
General