Adding or Replacing Hard Disks
Intel
®
Entry Storage System SS4000-E User Guide 135
5. If the firmware in the flash memory of the new unit differs from the firmware on the
hard disks, a message displays, prompting you to update the flash memory on the
storage system with the firmware from the hard disks. Click Update to proceed. If
you do not want to upgrade the firmware at this time, click Shut Down to shut down
the system.
Note: If the firmware on your new unit is newer than the firmware on your hard
disks, you might want to contact your vendor about obtaining the latest
firmware. see “Upgrading the Firmware” on page 64 for information about
upgrading to newer firmware.
If no message appears, you can manage the unit as you did before.
To Next Page
Loading...
Need help?
General