Intermec EasyCoder PX6i Service Manual

EasyCoder PX4i and PX6 Service Manual 215
Chapter 17 — Troubleshooting
Description:
The printer stops working after a successful startup.
• The Power LED is not lit.
Possible Causes and Suggested Remedies:
• Error in the supply of AC power to the printer.
- Refer to Chapter 17.2.
• Faulty console, faulty power LED, or faulty cabling between CPU
board and console.
- Refer to Chapter 17.7.

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g