Intermec EasyCoder PX6i - Starting Intermec Shell

&%%$
$)2%#4)/.
$OT
$OTLINE
ONPRINTHEAD
$OT
MMIN
0RINT7IDTH
MAXMMIN
-EDIA7IDTH
MMIN
88 EasyCoder PX4i and PX6i Service Manual
Chapter 8 — Print Unit
Print Window PX6i
The EasyCoder PX6i has an 8 dots/mm (203.2 dpi) printhead or, in the
Fingerprint version only, an 11.81 dots/mm (300 dpi) printhead.
8 dots/mm Printhead
Density 8 dots/mm (203.2 dots per inch)
Print width 167.4 mm (6.59 inches)
Number of dots 1344
Dot size 0.125 mm (4.92 mils)