ITech IT-M3100 - Opc

Common Commands
Copyright © Itech Electronic Co., Ltd. 82
Syntax
*IDN?
Arguments
None
Default value
Not applicable
Example
- > *IDN?
< - ITECH Ltd.,IT3100,60234567890123456,1.01-1.02-1.03
Note
⚫ “ - >” indicates the commands that you send to the IT-M3100 power supply.
⚫ “< -” indicates the response from the IT-M3100 power supply.
Returns
AARD
*OPC
This command sets the Operation Complete (OPC) bit in the Standard Event
Status Register to 1 when all other commands are complete.
Syntax
*OPC
Arguments
None
Default value
Not applicable
Example
*OPC
Query command
*OPC?
Returns
NR1