ITech IT-M3100 - Chapter8 System Commands; System:beeper:immediate; System:beeper[:State] <Bool

System Commands
Copyright © Itech Electronic Co., Ltd. 37
Chapter8 System Commands
SYSTem:BEEPer:IMMediate
This command tests the beeper function of the power supply. If it passes the
test, a beep is issued.
Syntax
SYSTem:BEEPer:IMMediate
Arguments
None
Default value
Not applicable
Example
SYST:BEEP:IMM
Query command
None
Returns
None
SYSTem:BEEPer[:STATe] <bool>
This command enables or disables the beeper function of the power supply.
Syntax
SYSTem:BEEPer[:STATe] <bool>
Arguments
0|OFF|1|ON
Default value
Not applicable
Example
SYST:BEEP 1
Query command
SYSTem:BEEPer[:STATe]?