ITech IT-M3100 - List:recall <NR1; List[:State] <Bool

List Commands
Copyright © Itech Electronic Co., Ltd. 56
Returns
NR1
LIST:RECall <NR1>
This command recalls the list program you saved in the specified memory
location.
Syntax
LIST:RECall <NR1>
Arguments
<1-10>
Default value
Not applicable
Example
LIST:REC 1
Query command
None
Returns
NR1
LIST[:STATe] <bool>
This command enables or disables the list function.
Syntax
LIST[:STATe] <bool>
Arguments
<0|OFF|1|ON >
Default value
Not applicable
Example
LIST ON
Query command
LIST[:STATe]?