ITech IT-M3100 - Status:questionable:enable <NR1; Status:questionable:ntransition <NR1

Status Commands
Copyright © Itech Electronic Co., Ltd. 75
Syntax
STATus:QUEStionable:CONDition?
Arguments
None
Default value
Not applicable
Example
STAT:QUES:COND?
Returns
NR1
STATus:QUEStionable:ENABle <NR1>
This command sets the Questionable Event Enable Register (QENR) of the
status model
Syntax
STATus:QUEStionable:ENABle <NR1>
Arguments
<0 to 65535>
Default value
Not applicable
Example
STAT:QUES:ENAB 24
Query command
STATus:QUEStionable:ENABle?
Returns
NR1
STATus:QUEStionable:NTRansition <NR1>
This command sets the negative value of the Questionable Event Register.