ITech IT-M3100 - Trace:points:actual; Trace:data

Trace Commands
Copyright © Itech Electronic Co., Ltd. 62
Default value
0.001S
Example
TRAC:TIM <NRf+>
Query command
TRACe:TIMer?
Returns
NR3
TRACe:POINts:ACTual?
This command selects number of actual readings in the cache.
Syntax
TRACe:POINts:ACTual?
Arguments
None
Default value
0
Example
TRAC:POIN:ACT?
Returns
NR1
TRACe:DATA?
This command reads all values saved in the cache.
Note
Before sending the query command TRACe:DATA?, the command TRIGger[:IMMediate]
must be sent to the instrument to trigger the instrument into data storage status. And the
argument of the command TRACe:FEED:CONTrol <NEXT|ALWays|NEVer> must be set
to NEXT or ALWays, otherwise the system will prompt an error.
Syntax
TRACe:DATA?