ITech IT-M3100 - System:communicate:gpib[:Self]:Address <NR1; System:communicate:lan:current:address <SPD

System Commands
Copyright © Itech Electronic Co., Ltd. 42
Arguments
None
Default value
Not applicable
Example
SYST:REB
Query command
None
Returns
None
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>
This command sets the GPIB address of the power supply.
Syntax
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>
Arguments
NR1 <0-30>
Default value
Not applicable
Example
SYST:COMM:GPIB:ADDR 14
Query command
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Returns
NR1 0-30
SYSTem:COMMunicate:LAN:CURRent:ADDRess
<SPD>
This command sets the IP address of the power supply.
Syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess <SPD>