ITech IT-M3100 - Output:ponsetup[:State] <RST|LAST|LOFF; [Output:]Protection:wdog[:State] <Bool

Output Commands
Copyright © Itech Electronic Co., Ltd. 10
Returns
NR3
OUTPut:PONSetup[:STATe] <RST|LAST|LOFF>
This command controls the settings and output state when the power supply is
powered on.
Syntax
OUTPut:PONSetup[:STATe] <RST|LAST|LOFF>
Arguments
<RST|LAST|LOFF>
Default value
Not applicable
Example
OUTP:PONS LAST
Query command
OUTPut:PONSetup[:STATe]?
Returns
RST|LAST|LOFF
[OUTPut:]PROTection:WDOG[:STATe] <Bool>
This command enables or disables the state of the communication watchdog.
Syntax
[OUTPut:]PROTection:WDOG[:STATe] <Bool>
Arguments
0|OFF|1|ON
Default value
0
Example
PROT:WDOG ON
Query command
[OUTPut:]PROTection:WDOG[:STATe]?