ITech IT-M3100 - Chapter14 Status Commands; Status:operation[:Event]; Status:operation:condition

Status Commands
Copyright © Itech Electronic Co., Ltd. 72
Chapter14 Status Commands
STATus:OPERation[:EVENt]?
This command reads the Operation Event Register of the status model.
Syntax
STATus:OPERation[:EVENt]?
Arguments
None
Default value
Not applicable
Example
STAT:OPER?
Returns
NR1
STATus:OPERation:CONDition?
This command reads the Operation Condition Register of the status model.
Syntax
STATus:OPERation:CONDition?
Arguments
None
Default value
Not applicable
Example
STAT:OPER:COND?
Returns
NR1