ITech IT-M3100 - Chapter4 Output Commands; Output[:State] <Bool; [Output:]Protection:clear

Output Commands
Copyright © Itech Electronic Co., Ltd. 6
Chapter4 Output Commands
OUTPut[:STATe] <bool>
This command sets the output state of the power supply.
Syntax
OUTPut[:STATe] <bool>
Arguments
0|OFF|1|ON
Default value
0
Example
OUTP ON
Query command
OUTPut[:STATe]?
Returns
0|1
[OUTPut:]PROTection:CLEar
This command clears the protection status.
Syntax
[OUTPut:]PROTection:CLEar
Arguments
None
Default value
Not applicable
Example
PROT:CLE
Query command
None