ITech IT-M3100 - [Source:]Current[:Over]:Protection:state <Bool; [Source:]Current:under:protection[:Level] <Nrf

Source Commands
Copyright © Itech Electronic Co., Ltd. 21
Example
CURR:PROT:DEL 10.00
Query command
[SOURce:]CURRent[:OVER]:PROTection:DELay? [MINimum|MAXimum]
Returns
NR3
[SOURce:]CURRent[:OVER]:PROTection:STATe
<bool>
This command enables or disables the over-current function.
Syntax
[SOURce:]CURRent[:OVER]:PROTection:STATe <bool>
Arguments
0|OFF|1|ON
Default value
0
Example
CURR:PROT:STAT ON
Query command
[SOURce:]CURRent[:OVER]:PROTection:STATe?
Returns
0|1
[SOURce:]CURRent:UNDer:PROTection[:LEVel]
<NRf+>
This command sets the under-current limit of the power supply.
Syntax
[SOURce:]CURRent:UNDer:PROTection[:LEVel] <NRf+>
Arguments
<NRf+> MIN TO MAX