ITech IT-M3100 - [Source:]Current:under:protection:warm <Nrf; [Source:]Current:slew[:Both] <Nrf+>,<Nrf

Source Commands
Copyright © Itech Electronic Co., Ltd. 23
Default value
0
Example
CURR:UND:PROT:STAT ON
Query command
[SOURce:]CURRent:UNDer:PROTection:STATe?
Returns
0|1
[SOURce:]CURRent:UNDer:PROTection:WARM
<NRf+>
This command sets the under-current warm-up time of the power supply.
Syntax
[SOURce:]CURRent:UNDer:PROTection:WARM <NRf+>
Arguments
<0.00-30.00>
Default value
30.00S
Example
CURR:UND:PROT:WARM 10.000
Query command
[SOURce:]CURRent:UNDer:PROTection:WARM? [MINimum|MAXimum]
Returns
NR3
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>,<NRf+>
This command sets the current rising and falling slew rate of the power supply.
Syntax
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>,<NRf+>
Arguments
<0.025-9.999>,<0.025-9.999>