ITech IT-M3100 - Parallel[:Unit]:Number <NR1

Parallel Commands
Copyright © Itech Electronic Co., Ltd. 69
Query command
PARallel:GROup?
Returns
CRD
PARallel[:UNIT]:NUMBer <NR1>
This command sets the total instrument number in the parallel operation.
Syntax
PARallel[:UNIT]:NUMBer <NR1>
Arguments
<1 to 4>
Default value
Not applicable
Example
PAR:NUMB 3
Query command
PARallel[:UNIT]:NUMBer?
Returns
NR1