ITech IT-M3100 - Chapter11 Battery Commands; Battery:charge:voltage <Nrf; Battery:charge:current <Nrf

Battery Commands
Copyright © Itech Electronic Co., Ltd. 64
Chapter11 Battery Commands
BATTery:CHARge:VOLTage <NRf+>
This command sets the charging voltage.
Syntax
BATTery:CHARge:VOLTage <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Default value
Not applicable
Example
BATT:CHAR:VOLT 5.0
Query command
BATTery:CHARge:VOLTage? [MINimum|MAXimum]
Returns
NR3
BATTery:CHARge:CURRent <NRf+>
This command sets the charging current.
Syntax
BATTery:CHARge:CURRent <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Default value
Not applicable
Example
BATT:CHAR:CURR 3.0
Query command
BATTery:CHARge:CURRent? [MINimum|MAXimum]