ITech IT-M3100 - List:terminate <Normal|Last; List:pause[:State] <BOOLEAN

List Commands
Copyright © Itech Electronic Co., Ltd. 57
Returns
0|1
LIST:TERMinate <NORMal|LAST>
This command sets the end state of the list program.
Syntax
LIST:TERMinate <NORMal|LAST>
Arguments
<CPD> NORMal|LAST
Default value
Not applicable
Example
LIST:TERM NORM
Query command
LIST:TERMinate?
Returns
NORMal|LAST
LIST:PAUSe[:STATe] <BOOLEAN>
This command sets the pause state of the list program.
Syntax
LIST:PAUSe[:STATe] <BOOLEAN>
Arguments
<0|OFF|1|ON>
Default value
Not applicable
Example
LIST:PAUS 1
Query command
LIST:PAUSe[:STATe]?