ITech IT-M3100 - [Source:]Voltage[:Level][:Immediate][:Amplitude] <Nrf; [Source:]Voltage[:Level]:Triggered[:Amplitude] <Nrf

Source Commands
Copyright © Itech Electronic Co., Ltd. 25
Default value
0.025S
Example
CURR:SLEW:POS 1.000
Query command
[SOURce:]CURRent:SLEW:POSitive? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
<NRf+>
This command sets the voltage value of the power supply. The query form of
this command gets the set voltage value of the power supply.
Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Arguments
<NRf+> MIN TO MAX
Default value
MIN
Example
VOLT 10.00
Query command
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]
<NRf+>
This command sets the output voltage value when the power supply receives a
trigger.
Syntax
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] <NRf+>