ITech IT-M3100 - [Source:]Voltage[:Over]:Protection:delay <Nrf; [Source:]Voltage[:Over]:Protection:state <Bool

Source Commands
Copyright © Itech Electronic Co., Ltd. 28
Arguments
<NRf+> MIN TO MAX
Default value
MAX
Example
VOLT:PROT 600.00
Query command
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:OVER]:PROTection:DELay
<NRf+>
This command sets the over-voltage delay time of the power supply.
Syntax
[SOURce:]VOLTage[:OVER]:PROTection:DELay <NRf+>
Arguments
<0.00-10.00>
Default value
10.00S
Example
VOLT:PROT:DEL 10.00
Query command
[SOURce:]VOLTage[:OVER]:PROTection:DELay? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:OVER]:PROTection:STATe
<bool>
This command enables or disables the over-voltage function.