ITech IT-M3100 - [Source:]Power:protection:state <Bool; [Source:]Function:mode <Fixed|List|Battery

Source Commands
Copyright © Itech Electronic Co., Ltd. 34
[SOURce:]POWer:PROTection:STATe <Bool>
This command enables or disables the over-power function.
Syntax
[SOURce:]POWer:PROTection:STATe <Bool>
Arguments
0|OFF|1|ON
Default value
0
Example
POW:PROT:STAT ON
Query command
[SOURce:]POWer:PROTection:STATe?
Returns
0|1
[SOURce:]FUNCtion:MODE <FIXed|LIST|BATTery>
This command sets the operating modes of the power supply.
Syntax
[SOURce:]FUNCtion:MODE <FIXed|LIST|BATTery>
Arguments
<FIXed|LIST|BATTery>
Default value
FIXed
Example
FUNC:MODE LIST
Query command
[SOURce:]FUNCtion:MODE?
Returns
FIXed|LIST|BATTery