ITech IT-M3100 - System:communicate:lan:dhcp <Bool; System:communicate:lan:socketport <NR1

System Commands
Copyright © Itech Electronic Co., Ltd. 44
Arguments
"<0-255>,<0-255>,<0-255>,<0-255>"
Default value
Not applicable
Example
SYST:COMM:LAN:CURR:SMAS “255.255.255.0”
Query command
SYSTem:COMMunicate:LAN:CURRent:SMASk?
Returns
<SRD>
SYSTem:COMMunicate:LAN:DHCP <Bool>
This command enables or disables the dynamic IP address function.
Syntax
SYSTem:COMMunicate:LAN:DHCP <Bool>
Arguments
<0|OFF|1|ON>
Default value
Not applicable
Example
SYST:COMM:LAN:DHCP 1
Query command
SYSTem:COMMunicate:LAN:DHCP?
Returns
0|1
SYSTem:COMMunicate:LAN:SOCKetport <NR1>
This command sets the socket port for the LAN communication.
Syntax
SYSTem:COMMunicate:LAN:SOCKetport <NR1>