ITech IT-M3100 - System:communicate:lan:dns2 <SPD; System:communicate:lan:restore

System Commands
Copyright © Itech Electronic Co., Ltd. 47
Syntax
SYSTem:COMMunicate:LAN:DNS1 <SPD>
Arguments
"<0-255>,<0-255>,<0-255>,<0-255>"
Default value
Not applicable
Example
SYST:COMM:LAN:DNS1 "192.168.0.1"
Query command
SYSTem:COMMunicate:LAN:DNS1?
Returns
<SRD>
SYSTem:COMMunicate:LAN:DNS2 <SPD>
This command sets DNS secondary address for LAN.
Syntax
SYSTem:COMMunicate:LAN:DNS2 <SPD>
Arguments
"<0-255>,<0-255>,<0-255>,<0-255>"
Default value
Not applicable
Example
SYST:COMM:LAN:DNS1 "192.168.0.2"
Query command
SYSTem:COMMunicate:LAN:DNS2?
Returns
<SRD>
SYSTem:COMMunicate:LAN:RESTore
This command resets the LAN settings to default settings.